Network Architecture & Design - Page 88 - Extreme Networks

Network Architecture & Design

Questions and discussions about network architecture and design in general

Forum Posts

Sorted by:

Start a conversation

ERRDISABLE EXTREME NETWORKS STP LOOP PREVENT

Hello all, I would like to know if its possible create loop prevent with ports on the same switch (X450E 48P) For example: Vlan default ports 1-16 tag 1 Vlan RH ports 17-32 tag 10 Vlan adm ports 33-48 tag 20 ipfowarding enable... If simulate loop b...

Voice and Data Vlans

I need to setup a switch (X460P) to be able to use a VOIP Phone (Polycom) and to be able to use a PC also. The PC MIGHT be plugged into the phone, or there may not be a phone at all, just a PC plugged into a port. All ports on the switch would need...

I need one device to have a specific ip default route to another firewall

Hi I have a remote site that connects through our hub via LAN and they have their own independent Firewall connection for internet. They communicate to a few devices on our network and everything else is blocked via access-list but they need to...

Extreme switch and Sonicwall Firewall

Has anyone converted from Cisco to Extreme that had a Sonicwall Firewall? I am trying to figure out how to configure the port that our Sonicwall is connected to on the Extreme to allow max internet connections speeds. When we had the same Sonicwall...

EXOS Non-Extreme Optics Licensing

Is this related to 3 party gbics / transceivers?

Top Kudoed Authors

User

Count

4

3

3

3

2

GTM-P2G8KFN