Use ERPS on mixed networks(other vendors devices)

[Seth__Kim]

Hello Dear,
Now I'm ready to add new devices on my (only use)Extreme networks, Also I'm using ring topology on EAPS now.

But, in this time I needed use other vendor devices. so I have question about ERPS(G8032)

1. If I were using other vendor devices(Cisco or Alcatel) on my network(only Extreme, use EAPS)
Can i add and use a sub ring(ERPS)?

2. Follow the 1, Can I use mixing 2 protocols(EAPS + ERPS) on main ring?

3. If I could complete and use follow the 1 and 2, Can you tell me any announced problems?

4. If I could not make that 1 and 2, Can you explain to me reason for this problem?

Thank you. Waiting your reply.

[Mel78__CISSP__E]

First. You may lookup ERPS Vs EAPS.

https://community.extremenetworks.com/extreme/topics/eaps_or_erps_differences

My advice is never mix them even if its doable.

"Just Because You Can, Doesn't Mean You Should"

It will save you from administration and troubleshooting headache.

[Seth__Kim]

Thank you W~

[Mel78__CISSP__E]

Hi,

You may refer to here. If you dealing with multiple vendors, stick with standards.

https://community.extremenetworks.com/extreme/topics/compatibility-between-eaps-and-g-8032-erps

[Seth__Kim]

Dear Leong,

Thanks for your reply, but I need reference now for my clients.
Can you tell(explain) me 1~2 cases about any problems?