Stephen_Stormon
Contributor
since ‎09-07-2021
‎08-27-2024

User Statistics

  • 138 Posts
  • 3 Solutions
  • 0 Kudos given
  • 3 Kudos received

User Activity

We have a LRM MACSec module connected to a x695 switch. The cable for Host Port 1 goes to Port 47 on the switch and the cable for Host Port 2 goes to Port 48 on the switch (this has been visually verified). We then have a uplink cable connected to th...
Is there any way to create an alarm in Extreme Site Engine when there is HAL congestion (normally seem via "debug hal show congestion")?  I ran "'show log event HAL" and I see a number of events that can be logged, but I'm not sure which one is relat...
We currently both connections from our ISP connected to one X460-48t switch (16.2.5.4 16.2.5.4-patch1-30)Ports are set to auto-negotiate.enable sharing 51 grouping 51-52 algorithm address-based L2 lacpWe are attempting to move the connections to two ...
On 12/2, we disabled VRRP on our old Core switch (shown with a priority of 254 below) and disconnected it from the -01 and -02 switches.  The -01 switch took over the master role as expected with the -02 switch being backup.  However, we have been ha...
We have two x695 switches running XOS 31.7.1.4 31.7.1.4-patch1-36.  We opened a case to see if there was a way to disable analytics on a specific port and were told that it can be done but is not officially supported.  The port in question is the ext...
Kudos from
GTM-P2G8KFN