Hi, I've been researching this topic and I'm still trying to wrap my head around the radiation patterns and how they play out three-dimensionally while designing a lecture hall.
All of the data sheets for the Extreme AP's and external Antennas have t...
I'm trying to map ports to my switch to form lags to some 3800 series Access Points. I'm having trouble identifying LAN1 vs. LAN2 wired ports on the AP. I've ssh'd into the AP and ran ifconfig to see if I can get any information on which port is ho...
So there are a couple of computers on campus which run software that actively goes out and "seeks" for Multi-Function Printers and gets a status from them using snmp V1 with the public community string. It runs through the entire network and retriev...
Hello,
We just upgraded to NetSight 5 and I would like to manage our C5110's with it. I'd open a case, but this seems like it would be a fun topic for here. So, what are the steps?
We allowed WiFi calling about a year ago and it's been working well. However, as Steve said, there are density considerations you must meet. Ekahau has a feature to view your wireless design called "secondary coverage" which allows you to look at a...
Channels 100, 108 and 116 are DFS channels. So, it sounds like you need to use non-dfs channels which are 36-48 and 149-161. Change to one of those channels and you won't get the "radar scanning" message anymore.
It looks like you'll have a clean swap then. How do your AP's find your controller? Do you use the dns entry? If you do want to test with a few AP's prior, then I would change the IP addresses of the new controller pair. Then statically tell the "...
I'm in the process of doing this. In fact, I've been in the process of doing this for a few weeks now due to the fact that I didn't have compatible AP's.
How many AP's?
Do you have all of your AP's on one controller or are they split and balanced ...
