Extreme Networks

wsalkos · 06-18-2024

hello everyone. I have a wiring diagram like below:I found a company where stp seems to work the way it wants and I want to change it. with extreme my experience is not very great. when I check show stpd s0, I see that the root is switch mgmt 440g2, ...

wsalkos · 02-08-2024

hey, from time to time I have a problem with my vlan for cameras and generally for the BMS system.Today I lost access to several cameras on different sites again :example log all mac moves go to the uplink port except for one switch which does mac mo...

wsalkos · 12-22-2023

Hiat the beginning, information about the devices, description from the diagram:SRV_Core - stack X670G2 (2 device) - firmware 22.3.1.4SRV_Core1 - stack X670G2(2 device) - firmware 31.7.1.4 I want to do MLAG between two X670G2 stacks.currently they ar...

wsalkos · 11-28-2023

Hi, I found this article : https://extreme-networks.my.site.com/ExtrArticleDetail?n=000002637 and I want to change the pool timeout on my v2110, but I cannot find this option in the settings. Can anyone help me ? I only found this: https://extreme-ne...

wsalkos · 10-29-2023

hey, I have a stack of x440 g2 switches. recently one of the switches in the stack failed and was replaced via RMA.Switches are added to XMC from where they download NAC policies.I wonder if there is any procedure for replacing a switch in a stack?I ...

wsalkos · 06-23-2024

hello, thank you for your answers. Yes, the priorities are at default values, but I didn't want to change them so as not to cause a break.we have implemented the elrp mechanism on user switches. We have about 50 access switches and stp is implemented...

wsalkos · 11-29-2023

hey, thanks for your reply. except that this is the configuration for xcc that is described in the guide. for v2110 it looks different but I can't find this option in the gui

wsalkos · 09-27-2023

thank you very much for the good advice! yes i have X670G2to illustrate, because I don't know if I understand correctly, would you do it as follows?but what if, for example, SW 1 or SW 3 fails? I understand that if I have fifty vlans on each switch, ...

Extreme Networks

User Statistics

User Activity

assistance in the concept of organizing STP with mlag

fdb mac move - how to look for the cause

creating mlag and switching dowsnstream devices

IdentiFi v2110 - change pool timeout

replacing the switch in the exos stack

Re: assistance in the concept of organizing STP with mlag

Re: IdentiFi v2110 - change pool timeout

Re: Mlag data link