Extreme Networks

Paul_Kyte

Hi,Where do I view the scheduled Firmware upgrades of WAPs on the ExtremeCloud IQ. I need to be able to see these and then cancel them if required. I've looked all over the Cloud IQ , user guides, and this forum, but haven't found anything.Can someon...

Paul_Kyte · 06-26-2024

I have added some Extreme APs to Solarwinds and quite frequently this shows errors and discards inbound on the mgt0 interface. When I look at the stats for the APs on CloudIQ I can only see the wired interfaces and not the mgt0 interface. The wired ...

Paul_Kyte · 02-13-2024

Hi,I have Extreme Access Points managed by ExtremeCloud IQ and these broadcast two SSIDs and drop Clients on to two VLANs/ Subnets depending on which SSID they authenticate to. The APs and VLANs/Subnets are in different VRFs. The APs have a managemen...

Paul_Kyte · 01-02-2024

I have an SSID that uses PEAP and MSCHAPv2 authentication with a CWP. The RADIUS Server is external and my WAPs are Extreme AP4000s. I'm using the Cloud IQ to configure and manage the WiFi and APs. This all works fine.What I'm wanting to do now is to...

Paul_Kyte

Hi Christoph,Thanks for this. When I tried a WAP yesterday I saw that it immediately copied the firmware onto the WAP and therefore concluded there was just a timed reboot. The perplexing thing is that there isn't a display showing all the WAPs (or a...

Paul_Kyte · 07-30-2024

Is my question too hard and no one is willing to take up the challenge?I would have thought some Extreme Guru would come back with an answer. Maybe there isn't any Gurus?

Paul_Kyte · 03-08-2024

Hi James, the RADIUS Server does do CoA but this is something that I'm not too clued up on. What I use is a Lab WAP and I make sure that this is cleared down of all associations and cache before I next try a test. So each test is done with a blank WA...

Paul_Kyte · 03-07-2024

Hi James,Thanks for the prompt reply and the suggestion to do the MAC lookup on the ISE Server. Unfortunately this isn't possible as the authentication either needs to be MAC or 802.1x. The MAC address is contained in the 802.1x authentication but I ...

Paul_Kyte · 03-06-2024

This is not the correct answer in my case. I don't know who marked it as correct but it wasn't me. It still isn't working as I want it to.When I have the MAC Auth and SSID Auth configured I can see on the external RADIUS Server (Cisco ISE) that when ...

Extreme Networks

User Statistics

User Activity

Cancel Scheduled Firmware Upgrade on WAP

SNMP monitoring shows Errors/Discards on AP Mgt0 Interface but CloudIQ doesn't show this

Why are Access Points Pinging Client VLAN Gateways

SSID with PEAP & MSCHAPv2 authentication and CWP, and bypass CWP if MAC known

Re: Cancel Scheduled Firmware Upgrade on WAP

Re: SNMP monitoring shows Errors/Discards on AP Mgt0 Interface but CloudIQ doesn't show this

Re: SSID with PEAP & MSCHAPv2 authentication and CWP, and bypass CWP if MAC known

Re: SSID with PEAP & MSCHAPv2 authentication and CWP, and bypass CWP if MAC known

Re: SSID with PEAP & MSCHAPv2 authentication and CWP, and bypass CWP if MAC known