Currently PPSK users are listed by account name. Since PPSK’s are bound to the mac address we need to see them in the web console as well. Currently the only way to do that is SSH into the PPSK AP and run show mac-binding commands.
I'm using HiveManager NG and have 2 policy's set up for 2 different sites respectively. Is there anyway I can partition hivemanager so my counterpart can login to the hive and only see his policy and access points?
I have 35 AP650's deployed across 3 buildings. I have some weird issues with Android phones ex. Pixel 3, Galaxy s8+, OnePlus 6t, and others getting the message connected, no internet.
I have the AP650 access point. Im using both wired ports and they are set to uplink. However Im only getting 1 link light back on the switch. I have Dell N2000 switches. What do I have to do to make it use both wired ports?
I have the new AP650's. Even though it is currently working with the wired ports set to uplink. I wonder if I should change them to trunk. To clarify I have another deployment of AP250s at a different agency and we had them set to trunk mode.
Update: We had some old LG androids that were still exhibiting the issue after making that change. I had to create a new SSID that used the main subnet (native vlan) to get them to connect. They would not connect to our dedicated vlan for Guest. I'm...
I found the culprit! Google implemented DNS over TLS in late 2018 on Android. This is when our issues started. It's not the same thing as DNS Sec which just authenticates the DNS server to make sure it is who it says it is. Once that part of DNS Sec ...
