Aerohive Migrated Content
Questions and discussions related to old aerohive products migrated over
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

We have some wifi issues in the performance and associating category. I checked the neighbors and RSSI is wel below 60. Though is a 33% CRC Rate normal (see copy paste below) ?

My guess would be there's other devices interfering. Is this the best to measure these? show interface wifi1 _counter--------------------------------------------------------------------------------215 recv eol interrupts1397703 rx frames15868 rx data...

I'm trying to understand what happens here. Is this just my client looking at possible candidates to roam to if needed? (see below) data comes from the client monitor tool on the hive manager

      Time       Client MAC Addr    BSSID    Device Name Level  Description ================================================================================= 12/27/2018 01:35:10 PM 302432AAAAAA 4018B194DAAB XXX23    BASIC  (3184)Tx probe resp (pwr 6d...

I'm not unable to add AP to another VHM; Error 9 The device appears to be in use by another VHM. I have a few AP's which are coming from an old customer, we like to reset them so they can be used in a Connect portal. Is this possible?

I'm not unable to add AP to another VHM; Error 9 The device appears to be in use by another VHM. I have a few AP's which are coming from an old customer, we like to reset them so they can be used in a Connect portal. Is this possible?

sander by New Contributor
  • 927 Views
  • 2 replies
  • 0 kudos
GTM-P2G8KFN