Hi, I'm adding a Cisco catalyst swicth 2960G with IOS version 15.0(2)SE11 to my lab environment with a x450-G2 and XIQ-SIte engine (complete of ExtremeControl engine).I've defined the new switch in the NAC engine with the follow radius attributes: An...
Hello,I have a network with unmanaged switches. I have 5 AP's (460C) I have added a DHCP server on one of my AP's. If I connect it works and I have internet.I have made a VLAN (VLAN11) for the guest network on the same AP. If I connect to the VLAN11,...
Hello everybodyI would like to be able to configure an XMC with NAC and Radius over 802.1X for a wired network.Can you help me with this? Does anyone have a guide or example on how to set it up?Thanks in advance. Regards.
Hi,I've got in my lab an x450-g2 switch and connected to one port of this in trunk mode, there is a cisco switch (on cisco the uplink port is gigabitethernet0/1).When I connect the cisco to the x450-g2 switch, the end-system table of the control engi...
Hello For a Customer we upgrade XMC to XIQ-SE. Sins that moment the archive of the Switches with there management IP adres connected to a other VR than vr-default, doesn't work. In XMC it did work ( years ago we make a copy of the exsting archive sc...
