ExtremeCloud IQ
Questions and discussions about ExtremeCloud IQ
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Clone an existing network policy?

This posthttps://extremeportal.force.com/ExtrArticleDetail?an=000092968and looking in my setup shows that this still doesn't appear to be possible.Does anyone know if this is anything that may become a feature?It would certainly be very handy to save...

JA by Contributor
  • 1018 Views
  • 0 replies
  • 1 kudos

AP130 stuck on "Bootstrap" status

The CLI command "reset config bootstrap" was used on an AP130.It appears now as "Bootstrap" in the XIQ "Managed" column and no action can be done from the controller.What do we have to do to get the AP managed back on XIQ please ?Reboot or AP button ...

VRPF by New Contributor
  • 531 Views
  • 0 replies
  • 0 kudos

VGVA Most Secure Configuration?

I am setting up a VGVA to terminate VPN connections from AP150W’s at several satellite offices and for WFH staff. We normally put things like this that expose an interface to the internet in a DMZ so that is where I started with the VGVA, but it look...

RJ45 by New Contributor II
  • 1509 Views
  • 1 replies
  • 1 kudos

Resolved! CloudIQ Connect Limits

Hi all, sorry for my question. Is there any limits about the numbers of devices that can I add on the CloudIQ Connect ? Thanks.

mokspok by New Contributor
  • 3531 Views
  • 4 replies
  • 2 kudos

Resolved! CLI COMMANDS PERMANENT

Hello !I've been changing some options with the CLI commands, but every  time I reboot or update it goes back to default settings... sorry the ignorance, but is ther a way to make the CLI command changes permanent?Thx!

mannix by New Contributor
  • 3291 Views
  • 4 replies
  • 2 kudos
GTM-P2G8KFN