ExtremeSwitching (EOS) - Page 104 - Extreme Networks

ExtremeSwitching (EOS)

Questions and discussions about EOS

Forum Posts

Sorted by:

Start a conversation

I need help to understand a enterasys router configuration

Hello, we have a Enterasys Matrix E5 chassis, that contains four switches (5H152-50) and a router (5SSRM-02). Here are a few lines extracted from the router configuration file : stp enable port gi.(1-2).(1.2) vlan make trunk-port gi.(1-2).(1.2) v...

800 Series VLAN console configuration problems

I am trying to add ports to a VLAN via the command line but the results are not what I was expecting. When I type the string, using the console's "Next possible completions:" suggestions "configure vlan "XXX" add tagged port 1" it returns only "N...

Dynamic ARP Inspection too many frame drops due IP VALID FAILURE

Hello, We have B5 series switches with enabled DAI and I am always getting these errors: May 12 08:02:54 10.12.3.114 DAI[170022088]: dai_util.c(592) 289852 This is from manager 1 %% DAI dropped ARP frame rcvd on i/f ge.1.38 in vlan 50, due to - IP ...

XSR VPN EZIPSEC

Hi, is there an manual/config guide availabe for an EZ-IPsec-configuration between two XSR-1805 (one with static/public IP-address and one with an private IP-address behind an ISP-router with dynymic address)?

getting an snmp alert 1.3.6.1.6.3.1.1.5.5 authentication trap failure on s series

getting an snmp alert 1.3.6.1.6.3.1.1.5.5 authenication trap failure on s series, is there any way to view in the logging buffer as we want the source ip address of the offending SNMP device

Top Kudoed Authors

User

Count

4

2

2

2

2

GTM-P2G8KFN