Dear all , I am getting the following Syslog message. IGMPSNOOP[256638384]: snooping_timer.c(646) 194947 This is from manager 1 %% snoopMemTimerUpdate: Group membership timer not found Below c5 settings #igmp set igmpsnooping interfacemode ge.1....
Hello all, I want to connect to EOS devices with plink (the command line version of putty). I need plink because I will use the communicaton in scripts on my PC. With XOS all works fine. For example I use this command: "plink ip –l user –pw passwo...
My customer want to mirror lag port to PA. there are two s3 using VSB. command : >set port lacp port tg.1.27 aadminkey 27 enable >set port lacp port tg.4.27 aadminkey 27 enable >set lacp aadminkey lag.0.27 27 >set port mirror create lag.0.27 tg.1....
Hy, we want to change a2 switch from dhcp to static ip, but the switch won't let me: TST2-A2-5(rw)->set ip address 10.142.14.5 mask 255.255.255.0 gateway 10.142.14.1 IP protocol must be none to set ip address. Use'set ip protocol{none | bo...
We have given below settings in an SSA with firmware Rev 08.31.01.0006 set port inlinepower admin off set port inlinepower admin auto. But connected device is not powered up. Inlinepower oper status remains searching. What could be the problem ?
