B5K 10Gb and 1Gb sfp port
Hi to everybody, on B5K switch when I use an 10Gb port (for example tg.1.49) for a uplink, can I use other sfp 1Gb port for other uplink? thanks.
Hi to everybody, on B5K switch when I use an 10Gb port (for example tg.1.49) for a uplink, can I use other sfp 1Gb port for other uplink? thanks.
According to my switch monitoring tool, Oper state is down and Admin state is up for rtr.0.1. But if I issue "show port" , "show ip interface" I can not see such an interface. How to get an idea about the relation between rtr interfaces and vlans ?
I need to know does Extreme E8 series switch supports L2GRE or Ethernet Over GRE. If i can terminate GRE tunnels on this switch, how many L2GRE tunnels can be terminated on this switch which can act like L2GRE concenterator
I have an enterasys XSR-3150 with firmware :7.6.14.0002. Sometimes my internet connectivity goes off and I have traced and realized its the router. I am able to ping and console to verify all my configs and everything seems fine but until I always ...
Hello. I changed CR battery and update firmware on B2G124-24. But i have cyclic reboot my switch and this message sysconf_attach: bcm device init failed soc_init: unit 2 not attached system_init: Device reset failed: Invalid unit In hpcBroadInit:10...
| User | Count |
|---|---|
| 4 | |
| 2 | |
| 2 | |
| 2 | |
| 2 |