Hi, I am getting below error while upload the configuration through TFTP server. Please see the below command which i tried and the error i received. upload configuration 192.168.50.241 primary.cfg vr VR-Default Error: read error My TFTP server
My firmware version is 16.2.5.4. Whether it can be upgrade to latest.
Should i able to upgrade xos for summitX46048p
Hi CommunityCan you help me configure a trunk between an Extreme Network switch and a Cisco switch?Please it's urgent so any help will be welcome
We've purchased an Extreme Networks 5420F-24P switch and are trying to connect to the interface via putty or MobaXterm with the configuration indicated in the Guide:Baud rate: 9600Data Bits: 8Stop bit: 1Parity: noneFlow control: noneBut it dont work....
