At a client we have one Extreme x670_G2 switch running with 3 VLAN's.
vlan1 - 192.168.10.129/26
vlan2 - 192.168.11.0/26
Transit - 192.168.11.193/26
Only vlan1 has devices connected (currently), including one server - 192.168.10.133
I want to access the devices inside vlan1 from the Cisco network of our client. I have no access to the current Cisco configuration.
The current setup is as follows to connect the 2 networks:
Both Extreme and Cisco have the Transit vlan (same tag).
Extreme has 192.168.11.193
Cisco has 192.168.11.254
On the Extreme ipforwarding is enabled on all VLAN's & there is a default route configured to 192.168.11.254
The current situation:
From the Cisco network I am able to connect to my Extreme switch via Telnet/SSH, on the Transit VLAN. From this vlan I can ping to vlan1 and I can ping to my server.
However, I am not able to connect directly to vlan1 from the Cisco network. I cannot ping vlan1, I cannot ping the server inside vlan1, I cannot RDP to the Server.
Do I need to create additional routes to facilitate the connection to my other vlans?
A few relevant configuration lines from my config:
create vlan "Transit"
create vlan "vlan1"
configure vlan Transit tag 17 configure vlan Transit add ports 47-48 untagged configure vlan Transit ipaddress 192.168.11.193 255.255.255.192 configure vlan vlan1 ipaddress 192.168.10.129 255.255.255.192 enable ipforwarding configure iproute add default 192.168.11.254