Hi,
is there a way to disable clipaging on XOS-based switches permanently? The command 'disable clipaging'only effects the active ssh/telnet session.
Thanks in advance
Philipp
Could someone explain what the following fields within the show edp port * detail command mean?
Tx stats: sw-pdu-tx=846 vlan-pdu-tx=846
Rx stats: sw-pdu-rx=875 vlan-pdu-rx=0
Specifically the VLAN PDUs. Are these sent over a specific...
I have added a new multicast stream , I have the server and on layer 2 I can see the correct streams , 239.192.1.56, and 239.192.2.56. on the edge device, I have MOP configured on the vlan and on the interlink vlan on the routing points , I have a ...
Hi all,
On my access layer switches, which are configured in stacking mode with versions 22.3.1.4 and 21.1.3.7, i am unable to telnet into slots. I am getting the following error:
Slot-1 ACCESS01 # telnet slot 2
sh: can't create /dev/: Is a directo...
By customer request, created an EXOS port statistics summary display that consolidates these separate EXOS commands into one display:
show ports statistics
show ports rxerrors
show ports txerrors
show ports congestion
show ports qosmonitor conge...
