I am trying to add an edge Exos switch to a fabric network. Fabric attach seem to be established between exos and vsp but the management vlan is showing None.# show fabric attach elementsFabric Attach Mode: Standalone ProxyMgmt AutoSystem Id Port Typ...
This switch have firmware 21.1.2 and I don´t update from USB because this option is from the version 22 onwards. I´m trying by TFTP, but have the error Failed to download image - tftp: timeout. I have the error both locally and by controller.From t...
I just wanted to add:The NP state remains after reboot if auto-discovery is not disabled. You have to add this command in the article before the reboot:configure stacking-support auto-discovery disable Greetings
I've been researching how to control bandwidth with any newer version of Exos and looks like egress is simple with the configure rate-limit xx port x out dropcommand but didn't find any ingress. I did find a post about creating a policy to match all ...
Hello all!I'm trying to get a local packet dump from a switch, but it doesn't seem to be working correctly.I have a series of EXOS 5520 switches where this command works perfectly fine (debug packet capture ports x on count 100 file-name pcaptest), a...
