Hi, i have a problem with mpls. After i had it configured, switch was rebooted with message:<Warn:DM.Warning> Switch FAILED (1) Process Failure09/29/2021 21:44:12.42 <Erro:DM.Error> Node State[4] = FAIL (Process Failure)09/29/2021 21:44:12.42 <Warn:...
Hello,I’ve a customer with routed remote-locations via MPLS.Wake on LAN on the main location is working fine (upd-profile with match-criteria to 3 source-IPs, dst-broadcast-mac and dst udp port)To get WoL running on the remote-location (also routing ...
I am look for a way to send an alert upon a failed login attempt on a switch running EXOS version 30. When I set out to do this, I thought it would be fairly straight forward, however my search has been fruitless. Is this even possible?
Hello,is it possible to clear the hole config / set to default in 1 dedicated section/chapter (e.g. snmp)?I’ve switches with a lot of different configs in individual sections. I’d like to clear this individual sections and put same config to all swit...
Does cisco XFP (10G LR & LX4) compatible to work with extreme 10G SFP+ extreme part codes -- 1030110 Gigabit Ethernet SFP+ module, 850nm, MMF 26-300m link, LC connector1030210 Gigabit Ethernet SFP+ module, 1310nm, SMF 10km link, LC connector
