In EXOS, what command would be the equivalent of forbidding multicast traffic out an uplink port? Basically disabling the mrouter port, but not the interface. (Picture of a Cisco switch example) I have a vlan that runs video only and it is contained...
I have a new 2 switch stack of 5520’s each with VIM-4X in the right side. I have 2 10gbps fibers that work perfectly in a load sharing to connect to another floor, and 2 Active Twinax to a vmware server in a load sharing link working perfectly.I hav...
Where can I get information on the scope and SLA of the EW TAC & OS Summit support?
when i configured switch this save configuration but if the switch reboot lost the configuration, i can see this configuration in the switch: information on SW #################### Slot: Slot-1 * Slot-2 ...
Hello Guys, i´m having problem to create a Lag lacp between an Extreme X690 and a HP, without the lag i can ping the HP, but i need to create a lag lacp to get 40G, follow below the config from my X690, does anybody know what could be? thanks.configu...
