Hi,we have a Customer who who has a remote Branch Office, They have connected the remote branch using ISP Media via Fiber(I mean an Ethernet Cable is connected from L3 Switch at main Office to the CP of ISP and Similarly an Ethernet Cable is connecte...
Hi,I was wondering what the easiest method would be to take an existing XOS switch with a loaded config and extract the whole lot out to an OpenConfig model.I understand we would be using RestConf to do this, but exactly how would we grab the whole m...
X440-g2 user read-only account “show configuration” command not working. IOS version running : 21.1.5.2 patch1-2Please let me know is there any guide which lists all the commands which we can run under read-only account?
Good time colleagues! I have a problem on my network. I can't understand why the ping jumps in waves? 10-20 packets are all good, ping is less than or equal to 1 ms, but a queue of 21 packets is suitable and the response time is 6-12 or even 48 milli...
Good morning. We have an older two-tier core/edge network where the core is a stack of SummitX series switches. There are two, 2-port LACP’s that act as ring in/out ports in an EAPS ring and the core stack is the master. We’re replacing the core with...
