ExtremeSwitching (EXOS/Switch Engine) - Page 14 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

16.2 ACL

I am mirroring a port that has the following ACL applied to a port's egress and see traffic not destined to 00:a0:aa:d0:01:08 in the captures. Does the mirror look at traffic before it hits the ACL or after?entry host8{if {ethernet-destination-addres...

Resolved! configure vlan default delete ports all

Hello,The subject of the question is the first line of VLAN configuration on a X670-48x running EXOS 16.2.5.4. I know wicked old. Anyway, this configuration has been around for ages and I'm looking to do some cleanup before I try to meld more VLANs ...

EXOS configuration by RESTCONF API

Hello to all the expertsI want to configure the EXOS switches that I have in the network by RESTCPNF API, but I have several problems. Thank you for your help.1- There is no SNMP configuration in DATA MODELS YANG, how can SNMP be configured by RESTCO...

Need help to convert Route-map config to EXOS 32.6 from EOS

Hi Guys,I would need help to convert Route-map and prefix list config to EXOS.Below is EOS config.ip access-list standard bgp-to-ospfpermit anyexitip access-list standard A_Routepermit host 0.0.0.0exit!route-map redistribution bgp-to-ospf permit 10ma...

Unexpected traffic on switch ports

We have a 7720-32c with machines on vlan X with MAC addresses for all machines established in the FDB, yet traffic sent from machine A to machine B (on the same switch) are showing up on machine C, D, E, F, ... and Switch 2 captures. Why is the switc...

Top Kudoed Authors

User

Count

28

26

20

20

17

GTM-P2G8KFN