ExtremeSwitching (EXOS/Switch Engine) - Page 15 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

switch 5320 removed from stack

Hello all,I have a couple of 5320-48 stacks running fw: 32.7.1.9-patch1-49 where one of the switches abandoned the stack and needed to be reinserted. Is there any place where I can search for information about these cases? I did a search in the commu...

Resolved! eXtreme Summit, WoL & 802.1x netlogin (NAC)

Hi there,i have a problem, which i hoped, was already solved. I read the corresponding article and did all which there wass recommended, but without success.https://extreme-networks.my.site.com/ExtrArticleDetail?an=000082951That's why i post here.We ...

Resolved! Dynamic VLAN Assignment with NPS and EXOS Not Working

Hello everyone,I'm setting up a lab where a Windows Server (running NPS) is connected to an EXOS switch. My goal is to configure dynamic VLAN assignment via 802.1X.I have successfully implemented 802.1X authentication using a username and password, a...

Problem with second mgmt IP

Hello,i need help with a problem:We have a X440-G2 which has on VLAN1 Managament IP-Address 172.31.30... and a default route to 172.31.30..I want the switch to have a management IP-Address in a diffrent subnet. for example Vlan2 ip should be 172.30.2...

Resolved! Inter vlan routing X440G2

I have VLan1 ( default ) ip range 192.168.100.xxx/22 and VLan20 ip range 192.168.1.xxx/24 that I need to have talk to each other. How do I set this up properly in my X440G2?

Top Kudoed Authors

User

Count

32

29

20

20

17

GTM-P2G8KFN