ExtremeSwitching (EXOS/Switch Engine) - Page 20 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Resolved! how to assign multicast groups to different egress queue with higher qosprofile than unicast

I have a egress port experiencing port congestion, downstream connected to multiple access networks with workstations receiving unicast and multicast traffic. Due to port congestion, multicast traffic such as CCTV live feed are experiencing frozen sc...

Routing problem with specific routing for single host inside a direct routing table

Hi,I have a problem with an quite old SummitX450 (rev0) Core Switch with EXOS 12.4.1.7Here's the deal:I have 2 vlan networks (510 and 520) connected to this switch. Both have an IP and serve as Gateway for the clients of VLAN 520 to reach clients and...

Resolved! Redundant connection from Service provider causes loops

Our service provider dropped a 10 gig private ring into our rack at our colocation facility. At our request, we asked for two ports so we can take one to each core switch (x690's). Unfortunately the handoff device that the service provider racked, ...

Resolved! System Type: EXOS or SwitchEngine ?

We noticed the show switch command on 2 different 5420s gave another System Type:System Type: 5420F-48P-4XE-EXOSSystem Type: 5420F-48P-4XE-SwitchEngineA few of the Switchengine ones give us a headache doing tftp image upload ( 31 -> 32 ) as...

Resolved! Clearing Ip-security dhcp-snooping violation list

I am not able to clear the violation entry. I've tried " clear ip-security dhcp-snooping entries vlan STUDENT_ITTSTAFF_849" and "clear ip-security dhcp-snooping entries STUDENT_ITTSTAFF_849 ports 5" Neither works. M_RM_4277_SW_TES_EX.dccc.edu....

Top Kudoed Authors

User

Count

28

26

20

20

17

GTM-P2G8KFN