ExtremeSwitching (EXOS/Switch Engine) - Page 204 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Login failed through SNMPv1/v2c

I periodically see these entries in my logs: SNMP.Master: Slot-1: Login failed through SNMPv1/v2c - bad community name (x.x.x.x) This isn’t an Extreme issue - that’s just where I am seeing the messages. SNMP is configured correctly and the devices...

Can we configure qos priority on untagged traffic

I try to configure qos profile configure for per c-vid in untagged traffic, but not success. Is there any way to configure qos profile for untagged traffic in per c-vid. I write policy as below and appply to the ingress interface as below. en...

Does X670-G2 & X590 support SDN?

confirm below features support X590 & X670-G2? if yes where I can find documentation about it. Switch should support Open Flow, Open Day light and Open Stack controller or equivalent.

Resolved! Copy .xos image file from /usr/local/cfg to correct install directory

Hi, I wanted to know whether there was a way to copy, or extract and install directly a .xos image file located in the default /usr/local/cfg directory on the switch. In this particular scenario we are connecting to the switch via WinSCP and transf...

OID for packet drop

Hi, I can’t find the OID for command show ports congestion on EXOS 16… I have problem with droped packets and I want collect statistics. Can anybody help me? Thanks

Top Kudoed Authors

User

Count

32

29

20

20

17

GTM-P2G8KFN