ExtremeSwitching (EXOS/Switch Engine) - Page 205 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Connecting/Uplink Summit x450 to B5 with CAT6

Hi out there, what do I need to do to get a summit running on a B5 on the same network? This is the current configuration: configure vlan default delete ports all configure vr VR-Default delete ports 1-16 configure vr VR-Default add ports 1-16 config...

snmp traps / syslog message for optical values out normal range

How can I get my XOS device to send snmp-trap or syslog message if the optical values are out of normal range? show port 1:1 transceiver information Port Temp TxPower RxPower TxBiasCurrent Voltage-Aux1/ Voltage-Aux2 (Celsius) (dBm) (dBm) ...

Review my ACL

Hi guys, I need to add a Dynamic ACL before a deny rule on my Black Diamond. The allow policies are called Voffice1 and Voffice2. The last policy is called VofficeDeny. 2 questions: 1- If I create a new Voffice3 policy that will allow, can I drag i...

SSH Server Public Key Too Small Port 22 Extreme

We have this security vulnerability “SSH Server Public Key Too Small Port 22 “ On switches, WC etc. It was indicated by our security department and it should be mitigated What could we do ? Regards

Issues with IPv6 ND NS

Hello! ASR CISCO<--->X460<--->X670/1<--->X8<--->X670/2<--->Second Router ND isn’t forwarded between ASR and other end Router, feelings that multicast is somewhere lost. IPv6 configured on Routers. EXOS switches as transit nodes (no neighbors, no c...

Top Kudoed Authors

User

Count

28

26

20

20

17

GTM-P2G8KFN