When I try to run the cable diagnostics on a VPEX port, I get the following message: Slot-1 VPEX HGRVCP-CORE-1.1 # run diagnostics cable ports 101:1Do you want to continue cable diagnostics? (y/N) YesError:Port 101:1 is Invalidusage: cablediag [-h] ...
Hi folks, I have problem connecting with console port to ISW 8-10/100P switch. I’m aware of known problem with unsupported console cables causing switch boot failure but that’s not the case here. I use extreme console cable provided with x440-serie...
Hello. Need SNMP OID to monitor traffic on the port for Extreme Summit X670 Similar to D-Link - ifHCInOctets.01/ ifHCOutOctets.01
Hello all, Currently trying to set up a secondary link from one of our edge devices back into our core. The core is running OSPF and the primary link works fine via OSPF, while trying to bring up the secondary link it seems to be getting stuck in th...
Hello Everyone, I have an Extreme Summit X440-L2-24T and I can’t enable ipforwarding. When I try to input the command “enable ipforwarding” followed by anything, I get the invalid input response. The enable ipforwarding command doesn’t come up when ...
