ExtremeSwitching (EXOS/Switch Engine) - Page 228 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Support with Info messages: DOSProt.DelACLOK

There is an extreme brand wireless and wireless network solution, the following log is constantly being presented in the coreInfo: DOSProt.AddACLOK> Slot-1: Added an ACLInfo: DOSProt.DelACLOK> Slot-1: Removed ACL from portInfo: DOSProt.PktCntExcd> Sl...

SolarWinds Network Topology Mapper

Hi Team,I’m testing SolarWinds Network Topology Mapper (NTM) but I’m having issues with the output, in some switches I’m able to see both Uplinks, and the Switches that I’m not able to see the UpLinks have the same configuration as the other ones.Ple...

Disabling a separate port when a specific port drops

Have a requirement to disable a separate port if the primary port ( connected to a firewall ) goes down. I have a scenario where ih have two links to the internet from two separate X480 switches, I need to advise the ISP that the primary Firewall is...

Resolved! X460-G2 cpu type

Hello Hub, I need to know what exact type of CPU is used in Summit X460-G2 series.DataSheet states only it is 64-bit MIPS Processor, 1GHz clock.At least I have to know how many cores CPU has. BEST REGARDSRobert

Multicast within a VR environment, where the RP is on another VR .

I have a multiple VR sceanario where the routing is provided by an External Palo alto firewall.BAsic ospf etc works a treat.The RV point is within VR_default on the core and I have a stream coming from a vlan in VR servers , through 2 ospf connected...

Top Kudoed Authors

User

Count

28

26

20

20

17

GTM-P2G8KFN