ExtremeSwitching (EXOS/Switch Engine) - Page 238 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

UPMPROFILE:

UPM profile is launch if one or port event (PortlinkstateUp) is caused. UPM profile set standard var (related just to UPM profile, so Param_0,Param_1 extc,exct... Question is: Is possible read the port(s) status and fix these as variable and then use...

EXOS "default next-hop" alternative for PBR

Hello, I can't seem to find out how to do a default next-hop instead of a next-hop when performing PBR. The default next-hop functions differently than next-hop alone. Here is the difference. Can someone help? https://www.cisco.com/c/en/us/sup...

Resolved! Using variables in "alias" definition in exshrc.xsf

Hi! We want to define aliases using the script exshrc.xsf that is run every time a user logs in. Simple aliases are OK, but we want to create a variable with the most interesting ports and base aliases off that variable, like this: set var PORTS "1...

Resolved! Netsight 6.3 G2 switches

We have netsight 6.3 and a mixture of X450 (G1), X460 (G1) X440 G2. Archive, image upgrade, monitoring works fine for G1 gear. I am having issues with image upgrade on 440 g2 from Inventory Manager. It says unknown image binary family. Thanks

UPM Profile

Hi I need your help: I use 2 Extreme switch summit x460-48p in stack. Condition that ports must work is as follow: If one of port 1:9 or port 2:9 or port2:10 go in state "down", then port 1:15 must go "Down" If port 1:9 and 2:9 and 2:10 are in sta...

Top Kudoed Authors

User

Count

28

26

19

18

17

GTM-P2G8KFN