ExtremeSwitching (EXOS/Switch Engine) - Page 237 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Extreme Switch x670 bandwidth limited to 3g insted of 10g

I would like to ask some question regarding our switch. I am testing the bandwidth of our switch. It is currently configured with 10g without any limits on its egress and ingress. However I am only able to get 3g bandwidth instead of 10g. I'll attach...

Resolved! Compatibility between MGBIC-LC01 & X440-G2

Hello everyone My question is about the MGBIC-LC01 part number. Is it compatible with X440-G2 switches? thank you in advance to those who read and answer this message

point to point inter vlan communication between extreme summit 48si and extreme x770

I have created a point to point inter vlan communication between extreme summit 48si and extreme x770, but unable to ping, because of static mac and also the summit switch is taking default configss on the port, pelasehelp with tshoot and commands to...

fdb lookup on vlan failed after 5 attempts

Error Message on the switch I am receiving several messages like this in my logs on Summit 460G2 running 16.2.4.5-patch1-5. The GTAC whitepaper suggest I should clear the snooping table for the entry however does not indicate how to accomplish this....

no netlogin sessions with legacy netlogin and Extreme Control

Hello, I've a problem with a X440 (G1) using legacy netlogin against Extreme Control. X440: 16.2.4.5 patch 1-6 XMC: 8.3 MAC-Authentication It's my first time to integrate a G1 into Extreme Control. No Problem with G2's and EOS. I can see Endsyste...

Top Kudoed Authors

User

Count

28

26

19

18

17

GTM-P2G8KFN