BootRom> config none doesnt work...I don't have a fail safe account set up.Is there any other option besides trying to mess with TFTP and get a new image onto the switch described here:https://extremeportal.force.com/ExtrArticleDetail?an=000074224I j...
Hi All, I want to deploy an new iSCSI Storage (Nimble) and use 2 Extreme X670V-48t for the uplink. As I far know, the storage array only support active/passive path. So if the active link goes down, the second link will handle all the iSCSI traffic....
Hi, I have an summit 670-g2 with 600-1000 dynamic ARP entry, on this core switch I've configured an ACL for log every TCP/UDP connection on an syslog: create access-list Log-connection " source-address 0.0.0.0/0 ; destination-address 0.0.0.0/0 ;" " ...
We have X440 switch , these were previously configured for RSTP, we did factory reset and it got MSTP enabled. How can i configure to convert to RSTP enable.
I'm thinking about: Stack or stand-alone? naming the edge ports the uplink ports, MLT ? NTP server address SNMPv3 settings radius server address and password ... possibility to choose which model --> ERS4900 . Thanks in advance.
