ExtremeSwitching (EXOS/Switch Engine) - Page 249 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

fdb lookup on vlan failed after 5 attempts

Error Message on the switch I am receiving several messages like this in my logs on Summit 460G2 running 16.2.4.5-patch1-5. The GTAC whitepaper suggest I should clear the snooping table for the entry however does not indicate how to accomplish this....

no netlogin sessions with legacy netlogin and Extreme Control

Hello, I've a problem with a X440 (G1) using legacy netlogin against Extreme Control. X440: 16.2.4.5 patch 1-6 XMC: 8.3 MAC-Authentication It's my first time to integrate a G1 into Extreme Control. No Problem with G2's and EOS. I can see Endsyste...

UPMPROFILE:

UPM profile is launch if one or port event (PortlinkstateUp) is caused. UPM profile set standard var (related just to UPM profile, so Param_0,Param_1 extc,exct... Question is: Is possible read the port(s) status and fix these as variable and then use...

EXOS "default next-hop" alternative for PBR

Hello, I can't seem to find out how to do a default next-hop instead of a next-hop when performing PBR. The default next-hop functions differently than next-hop alone. Here is the difference. Can someone help? https://www.cisco.com/c/en/us/sup...

Resolved! Using variables in "alias" definition in exshrc.xsf

Hi! We want to define aliases using the script exshrc.xsf that is run every time a user logs in. Simple aliases are OK, but we want to create a variable with the most interesting ports and base aliases off that variable, like this: set var PORTS "1...

Top Kudoed Authors

User

Count

28

27

20

20

17

GTM-P2G8KFN