ExtremeSwitching (EXOS/Switch Engine) - Page 251 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

ELRP to disable a port when Switch is connected

Hi Community, having a customer which is using ELRP on access ports and spanning tree on uplinks.Now he comes with a question if it is possible with ELRP to detect a switch connected to an access port and deactivate that port. As for my understanding...

Multi-rate SFP+ on X620 using DAC?

Good afternoon. I’m wondering if anyone knows the answer to this for sure? On a X620-16X, can a device supporting 2.5Gbps be connected to an SFP+ via DAC? If so, will it simply negotiate down to 1Gbps (since it’s not a 10Gbps device)? Is there such t...

Support with Info messages: DOSProt.DelACLOK

There is an extreme brand wireless and wireless network solution, the following log is constantly being presented in the coreInfo: DOSProt.AddACLOK> Slot-1: Added an ACLInfo: DOSProt.DelACLOK> Slot-1: Removed ACL from portInfo: DOSProt.PktCntExcd> Sl...

SolarWinds Network Topology Mapper

Hi Team,I’m testing SolarWinds Network Topology Mapper (NTM) but I’m having issues with the output, in some switches I’m able to see both Uplinks, and the Switches that I’m not able to see the UpLinks have the same configuration as the other ones.Ple...

Disabling a separate port when a specific port drops

Have a requirement to disable a separate port if the primary port ( connected to a firewall ) goes down. I have a scenario where ih have two links to the internet from two separate X480 switches, I need to advise the ISP that the primary Firewall is...

Top Kudoed Authors

User

Count

33

29

23

20

17

GTM-P2G8KFN