ExtremeSwitching (EXOS/Switch Engine) - Page 252 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Resolved! TFTP / Solution for a linux server

hi,I want to use a TFTP server ( like this for Windows https://extremeportal.force.com/ExtrArticleDetail?an=000081258) but on Linux to upload a file to a switch. I tested several solutions (tftpd-hpa ...), but none works. Do you know a solutions who ...

Clients cannot access network

I have a x440 that is accessible via the network fine, from the switch itself I can ping the rest of the network fine, but clients on this switch are getting the correct ip settings via dhcp but cannot ping anything else on the network besides this s...

Resolved! Clients on ports getting their VLANs via Policy not getting a DHCP address

I have an X620 setup as a core to a LAN with X440-G2 switches on the edge. I have policy working at the switches - for example: when a IP Camera is plugged in, policy assigns VLAN 13 untagged to the port, When an AP is plugged in, policy assigns VLA...

EXOS image corrupted

I was upgrading summit x250-48p from 12.3 to 15.3.5.2 but unfortunately there was a disconnection while downloading the image from tftp. my EXOS got corrupted on both partition. I tried to get in bootstrap and boot from the primary and secondary but ...

Stuck at "Authentication Service(AAA) on the master node is now available for login." Can't send ANY keyboard input.

I created an account just for this issue as the only mention of this issue seems to be unsolved.https://community.extremenetworks.com/extremeswitching-exos-223284/locked-at-authentication-serice-aaa-on-the-master-node-is-now-aailable-for-login-745806...

Top Kudoed Authors

User

Count

28

26

20

20

17

GTM-P2G8KFN