ExtremeSwitching (EXOS/Switch Engine) - Page 263 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Resolved! Any training videos you can recommend for EXOS?

Hello, I've manage to get EXOS working in GNS3 and trunk the Extreme switch to a Cisco switch, but I need to study these switches I will be moving from a Cisco team into Extreme soon and don't want to look silly. Are their any tutorial videos out t...

x590 as aggregation and V400 as extended switch with Radius authentication

Hi All, Need to know if x590 as aggregation and V400 as extended switch when configured the edge port of x590 for Radius authentication and connect the V400 as uplink dose the authentication carries on the V400.

Resolved! UEFI Boot Environment

We have recently installed a x440-G2. We are unable to boot into the UEFI imaging environment from our KACE box when directly connected to the switch. However if we place an unmanged 8 port switch between the systems and the x440 it boots in just f...

Problem tag vlan between ap7522 and switch summit x450e-48p

hello, In the goal to connect ap7522 to switch X450e . i have creat 1 Vlan "config" (tag 5) with ports 3 (untag) ,17(tagged) and 19(tagged) on the switch. To setup ap7522. i've tag native vlan 5 and allowed this one . but this configuration don't ...

Problem with port congestion

I`ve got two x440-24t switches in one city and two 1G uplink connections to the other city from these switches. When I configure the traffic between cities (around 200-300 Mb/s) to go through connection numer one (over DWDM form ISP1) everyting goes ...

Top Kudoed Authors

User

Count

28

26

20

20

17

GTM-P2G8KFN