ExtremeSwitching (EXOS/Switch Engine) - Page 264 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Cannot get node in stack to pass data

We have a stack of three switches of the Summit X450-G2. One failed and was replaced with the same one. Went through the usual process of replacing using enable stacking and assigning a number. We have it listed as a standby along with slot 3. 1 ...

24 port EXOS VM in GNS3/QEMU

Hi, I was able to successfully create a QEMU EXOS VM and console into it. Strangely though, when I create the QEMU VM, i choose 24 ports in e1000 type adapter however when i issue the 'show ports' command in EXOS, it only shows 12 ports. Is this lim...

Vulnerability scanning caused issues?

Hello, This past weekend we were running a vulnerability scan on our network. We've run these before without issue, however this time one of my switch stacks experienced an issue. Basically the vulnerability scan is a brute force login via SSH and t...

Resolved! vlan statistics

I have 2 similar devices x670-48x, image ver: 15.6.3.1. On the first of them I can create filter for vlan statistic 1024 times while on another one I can do it only 230 times. If I try to create one more filter I get an error: 07/15/2019 15:59:23....

EXOS VM Upgrade: Error: Failed to install image - Not enough disk space.

Hi there, I have my GNS3 appliance for VMware lab running using EXOS 22.5. Now I wanted to upgrade switches to 30.2, which is giving me this: code:# download image 192.168.99.99 vm-30.2.1.8.xos vr-mgmtNote: The inactive partition (secondary) will be...

Top Kudoed Authors

User

Count

32

29

20

20

17

GTM-P2G8KFN