ExtremeSwitching (EXOS/Switch Engine) - Page 265 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

VPLS L2VPN

I have a usecase where I have to "handle" untagged and tagged traffic on the same port while I run VPLS/L2VPN I need to tag all untagged traffic coming in on a port with a port-cvid XOS version 22.2.1.5 configure vman "test" add ports 21 untagged...

What happens if a Stack is broken?

Hi, does anybody know what happens with the clients of a dual stack if the stack is broken and we have a split brain situation with two master? We use the X440-G2 Switches with 22.6 EXOS conneced to MLAG Peers. Is there a solution to keep one of th...

Resolved! Does not go to bootrom on spacebar

Summit X670-g2-48x does not respond to spacebar to enter bootrom Im trying to reset the switch but it refuses to enter to bootrom. It loads the secondary OS image and gives me a "Pending-AAA login:" prompt. It does not let me type anything. Then a...

Change mac address of a vlan ?

X450, The MGMT port at back and a vlan I have created on the box are using the same mac address I'm not interested in the rites and wrongs of this I have my reasons for patching this together but they use the same MAC I'm looking to change the mac ...

Mlag between x690 and x460

I am just wondering if it is wise to do a two tier mlag between two different summit models. The x690 ISC would be 100gb. The x460 isc would only be 20gb with connection to the x690 only being 10gb. Is it wise to have two tier mlag between systems w...

Top Kudoed Authors

User

Count

28

26

20

20

17

GTM-P2G8KFN