ExtremeSwitching (EXOS/Switch Engine) - Page 275 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Virtual EXOS Switches limited to 100 Mbps?

Hi all, Completely understand the Virtual Exos images are non-production, but trying to get an understanding of why the ports are limited to 100 Mbps? Unfortunately you cannot turn speed auto off, and try 1000. Even though the documentation says usi...

Resolved! Block SNMP traffic to devices

Hello all, I'm a bit of a exos newb and need assistance. Is there a way to create an ACL to specifically block SNMP traffic to a device connected to a port? I was thinking of using the GUI route and set up a dynamic ACL. Would this be a good idea or...

Stacking Ports Flapping X460-G2

We have 9 X460-G2 stacks running version 22.5.1.7 and we have noticed that the stacking ports are flapping on a regular basis. The link goes down on Stacking ports 1:2 and 2:1 then comes back up. Has anyone else experienced this problem? What was th...

Resolved! EXOS 30.1.1.4

after upgrading EXOS firmware to 30.1.1.4, the ability to scan the cable disappeared * CoreSwichCanon.4 # run script cablediag.py -p 20 cablediag: 1.1.0.4 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ + C...

New to Extreme...Routing configuration question.

I am new to Extreme coming from a Cisco background and I need some help figuring out the best way to add a new uplink to an ISP. I recently started at this company and my first task is to add a new link to one of our ISPs. They are providing us a 3...

Top Kudoed Authors

User

Count

28

26

19

18

17

GTM-P2G8KFN