ExtremeSwitching (EXOS/Switch Engine) - Page 283 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Resolved! Extreme x870 and FEC.

hi,is there a reference as to whether, or not, the x870 supports FEC (forward error correction) at 100gb/s? my understanding is that i can opt for either FEC enabled optics or hardware (port-side); so i'm trying to build a matrix that fits.i read: ht...

An unusual log appeared about bfd in many switches Extreme in our core

Hello all An unusual log appeared about bfd in many switches Extreme, and we dont have this configured. Failed to receive packet of type BFD_CONTROL_PKT on an IPv4 socket and returned 0 Error: No such file or directory Thanks in advance. All swit...

Resolved! Config Help for Summit X440-24p - User manual - setup guide?

Hello, I am in the process of configuring a Summit X440. I can not ping or bring up a web gui based on my setup thus far. I am trying to connect with the web gui or ping with a seperate laptop (192.168.0.35/19) in port 2 of the switch (192.168.0.35)...

IPv6: permit does not stop passing of the packet according to the rules

I have two servers, IPv6 interfaces: 2a06:6780:0:1: 1 and 2a06:6780:0: 2: 2 Each of the servers is connected to BD-8810, on each port there is the same ingress policy, approximately with the following content: code:# To our IPv6entry 06_to_our_ipv6...

Resolved! BD-X8 bootrom is out of date, do 'install firmware' to update

Hello, all! After upgrade EXOS on second MM1 card (newly inserted MM-A): MM-B: MM-A FPGA firmware is out of date, do 'install firmware' to update. MM-B: MM-A bootrom is out of date, do 'install firmware' to update. By this topic - Topic Reboot is...

Top Kudoed Authors

User

Count

28

26

19

18

17

GTM-P2G8KFN