ExtremeSwitching (EXOS/Switch Engine) - Page 282 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

LACP Fallback Mode blocks ports on VLAN - making feature not functional

Greetings EXOS community - I am trying to see if the "LACP Fallback" feature can be of use to me to overcome the problem that PXE boot/DHCP has when a server reboots to re-image. I have a pair of stacked Extreme X460-48t switches running the late...

extreme radius reauth

hello all, i hope you can help me i'm working with extreme switch x440-24t and a cisco ise device, everything is working well, but in the posture phase the switch doesnt accept a radius reauthentication to move from from one vlan to another and then ...

debug autonegotiation problem

We have some clients with gigabit TP NIC on a X450-G2 (EXOS V16.1.3.6 patch1-4) - but they only connect with 100MB full duplex. (i investigate the problem via trial and error) My concern is now - how can i troubleshoot this from switch CLI? 1) How c...

How to configure two Vlans, VoIP and Data, through the same Ethernet connection

Hi community, I am new working with these Exos Switches and I have a Summit X450e-48p in my office and I would like to know the best way to have a setup where the Ethernet cable goes to the IP phone and from the phone to the PC, and have them using ...

Can Extreme Management Center alert us on OSPF Adjacency change?

Hello, I am in Alarms & Events tab under Alarm Configuration and I'm looking through the different Event, Log and Information Criteria in creating a custom alarm definition. I'm not seeing where I can configure an alarm for OSPF adjacency changes. ...

Top Kudoed Authors

User

Count

28

23

17

16

16

GTM-P2G8KFN