ExtremeSwitching (EXOS/Switch Engine) - Page 299 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Help me write UPM script

Hi! Help me write simple UPM script. I need what script do next: If link on port 25 down, script do next command: conf vlan VLANNAME del po 25 conf vlan VLANNAME add po 29 tag If link on port 25 is up then: conf vlan VLANNAME del po 29 conf vlan...

Resolved! EXOS version question for BD-X8

Hello, all! BD-X8: 1-Why in "EXOS release reccom-n" shown: 16.2.5.4 patch 1-3 as most stable 16.2.5.4 patch 1-5 as latest feature (but by logic last patch have to be most stable) in "extremeportal" in "Product" section I can see 16.2.5.4 patch 1-7...

Resolved! Cant ping pc connected to switch

Hi, im configuring a typology as follows: pc60 - switch4(x440) - core(x460) - switch11(x440) - pc50 I can ping both x440 from the core and the core from them. I also can ping switch 4 from switch 11 but not the other way around. I also can't ping...

Resolved! X460G2-24x-10G4 Booting after System Failure

Hello, all! Switch X460G2 is stopped. In this time in logs only Booting after System Failure. But what mean? ->show debug system-dump =============================================== Switch system dump information ===============================...

integration extreme switch to cisco ise

Hi all, i hope you are doing well please can you help to see if the error it's in the switch extreme or in the ise? im getting the following error from ise Event 5400 Authentication failed Failure Reason 11014 RADIUS packet contains invalid attri...

Top Kudoed Authors

User

Count

28

26

19

18

17

GTM-P2G8KFN