Hello everybody I want to know if it is possible to limit BW with two destination address on X460G2. I tried using policy (that I put down) with meter but it tell me that I cant use two source address. entry rule1 { if match any { destination-addr...
buen dia tengo el siguiente problema necesito realizar 2 cosas en una topologia tengo 8 switches x440-G2 a los cuales a 6 de ellos tengo que realizar un stack de la siguiente forma como realizar un starck de 2 switches x440-G2 ? comandos para real...
Recent EXOS 22.6 Patch 1-1: Is there an explanation why Receive Packet Counter is zero BUT Received Bytes Counter shows traffic? code:TEST-SW.6 # sh ports 4 statistics no-refreshPort Link Tx Pkt Tx Byte Rx Pkt Rx Byte Rx Pkt ...
EXOS offer this commands: code:configure ip-security dhcp-bindings storage filenameconfigure ip-security dhcp-bindings storage location Manual explains that switch can automatic / periodic upload DHCP Binding Adresses to a tftp server. Unfortunate...
Hi I will configure to UPM profile. for example, When the switch received the mac address 00??cc:11:22:33 from the port 12 , and then the UPM profile run "disable port 11" command. When the switch loss the mac address from the port 12, and then the...
