ExtremeSwitching (EXOS/Switch Engine) - Page 304 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Recommended switch x440-G2 configuration

Good afternoon I have a very simple doubt, ( of newbie ) and wanted some advice We need to have 1switch x440-G2 , with 8 sfp ports to 1gb I recommend the model x440-G2-24t-10GE4 Reading the technical specifications, would have a maximum of 8 sfp port...

Migrated to X440G2-48t-10G4 and some PCs can no longer connect to the network

Yesterday, we moved from a stack of x440-48t switches to a stack of X440G2-48t-10G4 switches and a large number of systems are unable to connect to the network. They are a mix of IPs set statically via DHCP reservations and others that just use what...

Configure NTP source ip

I am running EXOS 15.7.1 on an X670-G2 and im trying to configure NTP. the ntp server is a few hops away and the connection from the switch to next router is using a point to point /30 vlan. when it sends an ntp request it uses the source ip of the /...

X440-G2 intervlan routing

Could X440-G2 series supports Inter-VLAN routing? is this manageable switch?

OSPF Route filtering on S-Series

Please can this post be deleted, i put it in the wrong section.

Top Kudoed Authors

User

Count

28

27

20

20

17

GTM-P2G8KFN