Hi all, existing stack 450g1 running xos 15.3.5.2 new stack 450g2 running xos 22.5.1.7 Our config is dead simple; vLANS and some routes. A basic copy paste between the two stacks seems to be ok, but I would like to test the new stac...
Hello, all! There is L2 network on X670, all clients receiving VLAN untagged. At each member port, bind the MAC address of its router and disable the learning. There are customers who are connected "through" some operator, and the operator, wants to...
Hi all, we are installing a new office location with 2x stacks of X450Gs, so 16 switches total. Each has 2x 715W PSUs. Since installation a month ago we have had 10 PSU failures. This seems unusually high (we have two other similarly sized offices op...
Good afternoon I have a very simple doubt, ( of newbie ) and wanted some advice We need to have 1switch x440-G2 , with 8 sfp ports to 1gb I recommend the model x440-G2-24t-10GE4 Reading the technical specifications, would have a maximum of 8 sfp port...
Yesterday, we moved from a stack of x440-48t switches to a stack of X440G2-48t-10G4 switches and a large number of systems are unable to connect to the network. They are a mix of IPs set statically via DHCP reservations and others that just use what...
