ExtremeSwitching (EXOS/Switch Engine) - Page 311 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

gPTP enabled but disabled at the port level for summit x440-24t switch with exos v15.2

We have a Summit x440-24t switch with AVB support which we use for demos where multiple computers are connected and synchronized using gPTP. We had this capability working on the switch for the past 5-6 years. I am trying to test an updated version o...

Recommendation for configuration of Management port when Summit x440-24P is only switch in the network

I'm looking to see if anyone can give me a recommended configuration for the management port for a small network. I'm an automation engineer, so "part-time IT" and know enough basics about VLAN, routing etc. to get by with some suggestions. But I d...

TFTP between two extreme XOS switch

Hi, We have two NWIE cards with ExtremeXOS version 16.1.3.6 , on one of the switches ssh module is not loaded, we need to copy SSH module .xmod file from switch A to switch B, however when i tried via intercon I am getting error as follows: #down...

Configure stacking redundancy minimal maximal

Hello, I have a stack of 8 extreme switches. Their roles are this Switch 1 master (x670) Switch 2 standby (x460g1) Switch 3 standby (x460g1) Switch 4 standby (x460g1) Switch 5 standby (x460g1) Switch 6 standby (x460g1) Switch 7 standby (x460g1) Swi...

Unable to use WinSCP to connect to XOS Switches anymore

Anyone else having trouble using WinSCP to connect to XOS switches? Unfortunately I haven't had to connect for some time, so I cant pinpoint when it stopped working. Windows 10 running WinSCP 5.13.4 (Build 8731) - checked Windows firewall - turned o...

Top Kudoed Authors

User

Count

28

23

17

16

16

GTM-P2G8KFN