ExtremeSwitching (EXOS/Switch Engine) - Page 323 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Trouble connecting to Management port with either direct or switched ethernet connection

I have a windows 10 host with an ethernet interface (configured with static ip 192.168.1.2/24) that is directly connected to the Management Port of an X440G2-12p-10G4. Both sides of physical connection have their 1G link lights on. Via serial console...

ExtremeXOS 22.6.1 is now available!

ExtremeXOS® Release 22.6.1 Release Announcement BulletinOverview ExtremeXOS (EXOS) is the operating system for multiple platforms across the ExtremeSwitching portfolio. It provides a highly available,extensible and unified operating environment for ...

ACL

We don't allow non-company owned assets from connecting to our network, but have a need to allow a vendor to connect to our network for the purpose of managing our phone system. When we had our Cisco switches, I would allow access to that subnet but ...

Registering devices that bought by another company to our University Extranet Account.

Hi, We are IT department of Artvin Çoruh University. Some times we buy our network devices directly. Sometimes the networks devices came with a complete building/construction project. With construction projects, the construction companies buy these...

gPTP enabled but disabled at the port level for summit x440-24t switch with exos v15.2

We have a Summit x440-24t switch with AVB support which we use for demos where multiple computers are connected and synchronized using gPTP. We had this capability working on the switch for the past 5-6 years. I am trying to test an updated version o...

Top Kudoed Authors

User

Count

28

26

19

18

17

GTM-P2G8KFN