what are the requirements for replacing the battery in the x6790g2? does AC power need to be applied to prevent switch from losing its configuration data?
Hi,
with EOS I can use "show port advertise" to see the advertised speed of a network device which is connected to the switch, f.e.:
SWITCHNAME(su)->show port advertise ge.1.5
ge.1.5 capability advertised remote
---------------------------...
Hi,Hardware is X450G2, Firmware 22.4.1.4.I´d like to configure "ip-security dhcp-snooping" on Layer2 Access Switch for a few VLANs. How to configure Uplink Ports to Layer3 Core Switch where VLAN IP Interface resides ?For example, if 1:28 ist the inte...
I have a deployment with X460-G2 as Distribution switches and X440-G2 as Edge switches, I tried to use the MVRP to propagate Vlans from the X460-G2 to the X440-G2, the vlans are propagated but I couldn't use these vlans on the x440G2, any body have a...
Hello, colleagues!
When I configure MVRP - VLAN is adding fine, but how configure MVRP to adding ports dynamic to this VLAN?
Upstream switch, which transmit his VLAN:
enable mvrp
conf mvrp vlan auto-creation off
enable mvrp ports 10
Downstream swi...
