ExtremeSwitching (EXOS/Switch Engine) - Page 336 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

How to create the ACL Policy on Extreme X440-G2 Switch?

We have created 3 VLAN such as VLAN-1,2,3. Now, VLAN's should not communicate with each other they should be able to reach the only internet... How do we create the policy and map it appropriate VLAN Kindly help us to resolve the issue... ...

netlogin commands doesn't exist in command line on X440G2 v21.1.1.4

I'm configuring netlogin on a X440G2, and some commands aren't show in the CLI 1) the option "mode" dosn't exists configure netlogin ports 2:35 mode mac-based-vlans 2) the option "vlan" dosn't exists configure netlogin vlan NAC-EXTREME * Slot...

Export OSPF Cost 0 in EXOS 22.4.1

Hi, Why can I no longer export static routes into OSPF with a cost of 0 in EXOS 22.4.1? I need to be able to export the actual cost of the route as configured in the iproute command. Router-1 # enable ospf export static cost cost value ...

Does the X590 support LRM optics?

We recently found the data sheet for the X590 which could be a very attractive solution if it supports LRM optics. We know not all SFP+ ports include the phy necessary to support LRMs which becomes an issue for customers trying to 10G over old MM fi...

Where I can download EXOS Data Sheet from new web site?

Hi Team, From the new Extreme Networks web site. Where is EXOS Data Sheet? Thank you!

Top Kudoed Authors

User

Count

28

26

20

20

17

GTM-P2G8KFN