ExtremeSwitching (EXOS/Switch Engine) - Page 348 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Looking for the software release recommendations

As per the subject. havent managed to find the documentation since the website change over old link was; documentation.extremenetworks.com/hw_sw_compatibility/HardwareSoftwareCompatibility/r_exos-recommendations.shtml Thanks Ian

X870 QSFP informations can not be read

Hello, i have a Problem with a QSFP+ 40G SR4 in a X870 Switch. At Port 9 i can read all the information about the QSFP. But at Port 13 shows me the Switch that the QSFP is not present. Both Ports are Up with 40G Full Duplex and works fine. Firmware ...

Upgrade firmware on EAPS Master

I need to upgrade the firmware on my EAPS Master which is a stack of 2 - X450-G2-48p's. When I reboot the stack how will the ring be affected? Should I remove the uplinks from the switches prior too, do the upgrade and reboot off network then plug it...

secondary ip and esrp

Does ESRP work with secondary ip's on a vlan interface? The situation is; We have 2 core routers sharing a managament vlan. They both share 1 public ip in ESRP. The customer also have the need for a private IP on the same vlan. I can add these ip'...

Inter-VLAN Routing not working correctly

Hello! I just took over a System Administrator role for a company and trying to figure out what happened to one of their VLANs. I am new to the Extreme Network devices. They currently have 3 stacked X450-e as their main switch stack/router. The pr...

Top Kudoed Authors

User

Count

28

26

20

20

17

GTM-P2G8KFN