ExtremeSwitching (EXOS/Switch Engine)
Questions and discussions about EXOS
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Simple VoIP configuration

I have a client with only 1 vlans - the default vlan and a VoIP called ENAVoice. All the tagging is done at the phone handset. create qosprofile "QP5" configure vlan "ENAVoice" qosprofile QP5 configure dot1p type 5 qosprofile QP5 configure dot1p ty...

LDP NonExistent

Hello Community, Does anyone had the same issue when some peers on the LDP are NonExistent? My topology has 50+ Extreme switchs on the same OSPF AREA and after a window maintance, where a switch was rebooted, some switchs had the NonExistent and co...

ACL Log

Hi, I've configured an ACL on our Extreme Summit 670 core switch for log connection inside our network. This is the ACL config: create access-list Log-connection " source-address 172.26.8.0/21 ; destination-address 172.26.8.0/21 ;" " permit ; log ;...

Cisco BGP CLI conversion to EXOS

Hi All, I'm finding EXOS command for cisco command below; ###### Redistribution of static route with tag number ip route 102.252.20.200 255.255.255.255 103.20.2.2 10 tag 9999 router bgp 20 redistribute static route-map static2bgp ! route-...

Lee__Mark by New Contributor
  • 401 Views
  • 0 replies
  • 0 kudos
GTM-P2G8KFN