ExtremeSwitching (EXOS/Switch Engine) - Page 382 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Unmanaged switch loop prevention connected to 460-G2

So we have a bunch of 460-G2's we will be replacing some enterasys C2's. Currently SpanGuard on the C2's was not enabled hence when people with an unmanaged desk switch looped 2 of the ports all hell breaks loose with Spantree. The 460-G2's have STP...

EXOS: UPM Script - port number in log message

Today i play around with a UPM Script which refresh nodealias table after a port link down. # # Module upm configuration. # create upm profile clear-nodealias create log message Starting_Script_clear-nodealias clear nodealias port $EVENT.LOG_PARAM_0 ...

How to setup sharing in MLAG for Windows Server NIC Teaming ?

Hello, What is the best sharing algorithm for connecting Windows Server 2012 NIC teaming ? We have a MLAG disign at the core and NIC teaming mode on Windows is switch independent. I guess LACP is not good choice here (?). REGARDS

in Summit X460G2 24 ports, does not link in the last 4 ports copper a device that negotiates to 10 HD. Why do not you link to those ports?

in Summit X460G2 24 ports, does not link in the last 4 ports copper a device that negotiates to 10 HD. Why do not you link to those ports?

how can I create a access-list on egress to allow only a few vlans inside a vman ? drop all doesnt work too

HI, my target is to allow only a few vlans from a vman to exit a specific port. example port 1, 2 and 3 at untagged in vman 2000. all traffic from 1 should be forwarded to 2 and vice versa. only vlan 100 and 102 should be forwarded to port 3.. I d...

Top Kudoed Authors

User

Count

28

26

20

20

17

GTM-P2G8KFN